Table of Contents
Advertisement
User Name: It is the User Principal Name or RADIUS Identity (if necessary).
Note: The User Name supports these characters: a-z, A-Z, 0-9, @, ., and _.
Password: It is the password of the Private Key.
System Date & Time: It is used to set date and time for the receiver. Users should
set the date and time according to the validity period of the certificates.
CA Certificate: It is the root certificate. Click the Browse button to browse and add
the certificate.
User Certificate: It is the user certificate. Click the Browse button to browse and
add the certificate.
Private Key: It is the user's private key. Click the Browse button to browse and add
the certificate.
Validity Period: It displays the effective period of the certificates.
Note:
Currently, only certificates in ".pem" format are supported, and the certificates must
be generated using the "DER encoded binary X.509" method.
The length of the certificate file name must not exceed 64 bytes, and the file size
must be less than 100 KB.
All the three certificates are required for authentication.
Users should select the right certificate file for each type of certificate.
2.
Connect your ScreenBeam receiver to your network with a quality Ethernet cable.
3.
The receiver will be assigned an IP address after a few seconds, if a DHCP server is
available on your network.
Note: ScreenBeam receiver is set to obtain an IP address automatically by default. If
you want to set the receiver's IP address or DNS server to static, consult your network
administrator.
Refer to Section V.2 Using Local Management on ScreenBeam for detail on how to log
7
Advertisement
Table of Contents
