Screenbeam 1100 Plus; Minimum Requirements; System Requirements; Network Requirements - ScreenBeam 1100 Plus User Manual

I.2.1

ScreenBeam 1100 Plus

 Power Input (12V/3A), for power supply
 USB ports, (two USB 2.0 ports and one USB 3.0 port), for provisioning CMS connection
data, firmware update, connecting to touch display, and USB over network control (UIBC)
 Ethernet Port (ETHERNET), for receiver management with ScreenBeam Central
Management System (CMS) / Local Management Interface (LMI) or for multi-media
streaming over infrastructure network
 HDMI Output (HDMI OUT), for connecting to HDTV/projector with an HDMI port for video
and audio output
 HDMI Input (HDMI IN), for connecting to an HDMI source for video input
 Audio Output (AUDIO), for outputting audio to speaker
 Power Indicator, indicating power supply status
 Reset button, for resetting the receiver to default settings
I.3

Minimum Requirements

System requirements for ScreenBeam 1100 Plus are shown below:
I.3.1

System Requirements

Client device from 2015 or newer with one of the following operating systems:
 Windows 10 build 1709 (and later)
macOS X 10.10 (and later)

iOS 9 (and later)

Android 4.4 (and later) with Miracast

Chrome OS 74.0.3729.159 (and later) with Cast

I.3.2

Network Requirements

For wireless display over the existing wireless network or LAN:
Ethernet: 100BASE-T 10/100 connection (1 Gbps is recommended)

Wireless: 802.11ac (5 GHz is strongly recommended)

2