Setting Up Wireless Display Mode - ScreenBeam 1100 Plus User Manual

Wireless display receiver

Hide thumbs Also See for 1100 Plus:

Table of Contents

3. Click the Apply button, and then click OK on the pop-up message box to confirm.

V.3.2

Setting up Wireless Display Mode

ScreenBeam 1100 Plus supports standard Wireless Display mode and Classroom

Commander mode.

To select a wireless display mode for your receiver, follow this procedure:

1. Go to the Features tab page by clicking the Features tab.

2. Go to the Wireless Display Mode section, and set Wireless display mode to support

client devices to Commander Mode or Standard Wireless Display.

Standard Wireless Display: This is a one by one wireless display mode. By default,



this mode is selected. In this mode, the receiver can work with Windows and/or

Android devices with Miracast support, Apple device with AirPlay, and ChromeOS

device with Cast, without app.

Commander Mode: The receiver works with ScreenBeam Classroom Commander



software to achieve classroom orchestration. In this mode, the receiver can accept

up to 51 client connections.

There are two options for the Commander mode: For Windows 10 and For

Chromebook.

For Windows 10: The receiver works with Classroom Commander on the

•

Window 10 platform.

For Chromebook: The receiver works with Classroom Commander on the

•

Chromebook platform.

Refer to the respective Classroom Commander user guide and deployment guide

for details.

Table of Contents