3. Click the Apply button, and then click OK on the pop-up message box to confirm.
V.3.3
Wireless Display over LAN
Wireless Display over LAN allows non-Miracast ready devices to project over the local
network connection. ScreenBeam receiver must be connected to the same network with the
source device via Ethernet (recommended) or wireless.
V.3.3.1 Setting up Wireless Display over LAN for Windows 10 Devices
If your Windows 10 device is not Miracast capable, you can still project your screen over LAN,
as long as the following requirements are met:
Operating system: Windows 10, version 1809 or newer
100M/1000M Ethernet adapter (optional, but recommended) and Wi-Fi adapter are
available
Stable local area network
Windows 10 device and ScreenBeam 1100 Plus receiver are connected to the same
LAN
Required ports: TCP 7250, TCP 7236
TCP 7250, for Miracast over LAN data stream
•
TCP 7236, for RTSP
•
47