1. Manuals
  2. Brands
  3. ScreenBeam Manuals
  4. Receiver
  5. 1100 Flex
  6. User manual

ScreenBeam 1100 Flex User Manual

Wireless display receiver
Hide thumbs Also See for 1100 Flex:
Table of Contents

Advertisement

Quick Links

Download this manual
ScreenBeam 1100 Flex
Wireless Display
Receiver
Firmware 11.3.16.0
User Manual
V1.0
For Model # SBWD1100F

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1100 Flex and is the answer not in the manual?

Questions and answers

Related Manuals for ScreenBeam 1100 Flex

Summary of Contents for ScreenBeam 1100 Flex

  • Page 1 ScreenBeam 1100 Flex Wireless Display Receiver Firmware 11.3.16.0 User Manual V1.0 For Model # SBWD1100F...

  • Page 2: Table Of Contents

    Network Requirements ..................4 1.3.4 Setup Requirements ....................5 Part II Installing the Receiver ......................6 Setting up ScreenBeam 1100 Flex Receiver ..............6 Connecting the Receiver to a Network ................. 8 2.2.1 Wired Connection ....................8 2.2.2 Wireless Connection ................... 11 2.2.3...
  • Page 3 Local Wi-Fi Settings ................... 100 5.3.10 Receiver Management Access Settings ............. 102 5.3.10.1 Specifying ScreenBeam CMS for the Receiver ........102 5.3.10.2 Specifying a Port for the Receiver’s LMI ..........103 5.3.10.3 Setting up Local Management Interface Access ........ 104 Part VI Updating Firmware for the Receiver .................
  • Page 4 Firmware Update via LMI ..................106 6.1.1 Updating Firmware from a Local PC ..............106 6.1.2 Updating Firmware from the Internet .............. 109 Firmware Update using a USB Flash Drive ..............111 Part VII Receiver Maintenance ...................... 112 Setting up Receiver Auto Reboot ................112 Setting up Receiver Logging ..................

  • Page 5: Part I Getting Started

    (hereinafter referred to as “ScreenBeam 1100 Flex”). ScreenBeam 1100 Flex enables native screen mirroring from your Windows, Android, Apple, and Chromebook devices - without apps or wires. ScreenBeam 1100 Flex lets you wirelessly stream what’s on your wireless display capable device to your HDTV, including movies, videos, photos, music, and more.

  • Page 6: Screenbeam 1100 Flex

     USB ports, (two USB 2.0 ports and one USB 3.0 port), for provisioning CMS connection data, firmware update, connecting to touch display, and USB over network control (UIBC)  Ethernet Port (ETHERNET), for receiver management with ScreenBeam Central Management System (CMS) / Local Management Interface (LMI) or for multi-media streaming over infrastructure network ...

  • Page 7: Wi-Fi Miracast Facts & Requirements

    Miracast devices to discover. The ScreenBeam receiver is an in-room solution and the receiver and user connecting to it must be in the same room.  Line-of-sight is not required, but ScreenBeam receiver shall not be placed in a spot where 802.11 Wi-Fi could be affected. ...

  • Page 8: Network Requirements

    For wireless display over the existing wireless network or LAN: Ethernet: 1000BASE-T 10/100/1000 connection (1 Gbps is recommended)  Wireless: 802.11ac (5 GHz is strongly recommended)   Multicast DNS (mDNS) support is required for auto-discovery of ScreenBeam  Required ports: see the table below. Port Function Feature...

  • Page 9: Setup Requirements

    1.3.4 Setup Requirements ScreenBeam 1100 Flex receiver  Display with an available HDMI input  (Optional) Touchscreen with USB touch cable   An Ethernet network connection with DHCP IP or a Wi-Fi router Note: This is used for wireless display over LAN and management.

  • Page 10: Part Ii Installing The Receiver

    Part II Installing the Receiver This chapter explains how to connect ScreenBeam 1100 Flex to a display such as an HDTV or projector. Make sure you have all the contents from the receiver’s package available before starting. 2.1 Setting up ScreenBeam 1100 Flex Receiver It is quite easy and fast to set up the receiver.
  • Page 11 Verify that the ScreenBeam 1100 Flex receiver shows the idle screen on the display. The receiver is connected to the display, and it is ready for use. (Optional) Connect your ScreenBeam receiver to a speaker in your room using a 3.5mm audio cable, as shown below:...

  • Page 12: Connecting The Receiver To A Network

    2.2 Connecting the Receiver to a Network ScreenBeam 1100 Flex receiver supports both wired and wireless connections. You can deploy ScreenBeam 1100 Flex receivers based on your network requirements. Note: The setups in this section are optional. Wired Ethernet connection is highly recommended for screen mirroring protocol that requires infrastructure network (e.g.,...
  • Page 13 Users should select the right certificate file for each type of certificate. Connect your ScreenBeam receiver to your network with a quality Ethernet cable. The receiver will be assigned an IP address after a few seconds, if a DHCP server is...
  • Page 14 Note: ScreenBeam receiver is set to obtain an IP address automatically by default. If you want to set the receiver’s IP address or DNS server to static, consult your network administrator. Refer to Section 5.2 Using Local Management on ScreenBeam for detail on how to log  into the receiver’s LMI.

  • Page 15: Wireless Connection

    2.2.2 Wireless Connection ScreenBeam 1100 Flex receiver provides a built-in WLAN adapter, which allows the receiver to wirelessly connect to your network. It is required to set up the wireless connection parameters before starting the connection. To connect the receiver to a wireless network, follow this procedure: Log into the receiver’s LMI.
  • Page 16 WPA2-PSK[AES], WPA-PSK[TKIP]+WPA2-PSK[AES], PEAP/MSCHAPV2, and EAP-TLS. When Security Type is set to Shared, WPA-PSK[TKIP], WPA2-PSK[AES], or WPA-PSK[TKIP]+WPA2-PSK[AES],  User Name: Not used.  Password: The pre-shared password for the wireless SSID. Note: The length of the Password should be 1-63 characters. When Security Type is set to PEAP/MSCHAPV2, ...
  • Page 17  All the three certificates are required for authentication.  Users should select the right certificate file for each type of certificate. Click the Apply button at the bottom of the page to save new settings to the receiver. The WLAN adapter will connect to the wireless router (AP) in a few seconds. Note: ...

  • Page 18: Dual-Network Connection

    (on guest network). Plan your network in advance. For example, one for internal use, and one for guest use. Connect ScreenBeam 1100 Flex to the internal network via Ethernet, and verify that an IP address is assigned.

  • Page 19: Part Iii Connecting Client Device

    In this mode, user needs to connect the client device Wi-Fi to the ScreenBeam Wi-Fi and then select the receiver to mirror. This mode is ideal for guest client devices that need wireless display and/or Internet access. Internet is available if the ScreenBeam receiver is connected to the existing network, wired or wireless, and the receiver’s local Wi-Fi is set to NAT or Bridge.

  • Page 20: Wi-Fi Miracast

    3.1.3 Wireless Display over existing LAN ScreenBeam 1100 Flex can be connected to the existing wireless and wired network and supports wireless display for client devices on either network. This is a common setup to support client devices that need access to network resources. Additional port and network configurations may be required for this mode to work seamlessly.

  • Page 21: Connect Using Local Wi-Fi

    3.2 Connect using Local Wi-Fi This section explains how to connect a client device to ScreenBeam 1100 Flex using the local AP on ScreenBeam 1100 Flex. Make sure that the Wireless display over LAN feature is enabled for Windows 10/11, macOS/iOS Airplay and/or Google Cast screen mirroring.
  • Page 22 Select the ScreenBeam receiver name as shown on the TV display.  For Windows 10/11 Select Connect or Cast from the Action Center by swiping from right or simultaneously pressing the Windows key and K. Figure: Selecting receiver on Windows 10 device...
  • Page 23 Figure: Selecting receiver on Windows 11 device  For iOS or macOS Connect with Airplay from the menu bar or control center. Figure: Selecting receiver on iOS device...
  • Page 24 Figure: Selecting receiver on macOS device  For Chrome OS or Chrome browser Connect with Cast or Cast screen from the Quick Settings panel on Chrome OS or from the Chrome browser menu. Figure: Selecting receiver on Chrome OS...
  • Page 25 Figure: Selecting receiver on Chrome Browser Note: On Chrome browser, you can define a source to cast before connecting to ScreenBeam. Enter in the PIN if required. If the PIN code is not displayed, try the hidden PIN 1234 (default).
  • Page 26 Windows 10 Windows 11...
  • Page 27 macOS Select duplicate or extended screen mode if prompted. If the display has touch functionality, Windows 10/11 devices can take advantage of the touch and inking feature by selecting Allow mouse, keyboard, touch, and pen input from this device. Refer to section 4.3 USB over Network Control for more details. Windows 10 Windows 11 Note: To disconnect, follow instructions in step 3 to return to the screen mirroring menu and...

  • Page 28: Connect Using Wi-Fi Miracast

    3.3 Connect using Wi-Fi Miracast This section explains how to connect a client device to ScreenBeam 1100 Flex using Wi-Fi Miracast. Select the ScreenBeam receiver name as shown on the TV display.  For Windows 10/11 Select Connect or Cast from the Action Center by swiping from right or simultaneously pressing the Windows key and K.
  • Page 29 Figure: Selecting receiver on Windows 11 device  For Android Select the Screen Mirroring option from the quick access menu and follow the connection instructions. Note: Different Android device manufacturers may have different names for their wireless display apps. Enter in the PIN if required. If the PIN code is not displayed, try the hidden PIN 1234 (default).
  • Page 30 Windows 10 Windows 11 Android...
  • Page 31 To disconnect, follow instructions in step 1 to return to the screen mirroring menu and select mirroring off.  Some Android devices do not support PIN and will fail to connect. Refer to section 5.3.5.1 Setting up PIN Pairing Method below for instructions on how to configure ScreenBeam and disable PIN enforcement.

  • Page 32: Connect Using Existing Wireless Network Or Lan

    3.4 Connect using Existing Wireless Network or LAN This section explains how to connect a client device to ScreenBeam 1100 Flex using existing wireless network or LAN. Make sure that the Wireless display over LAN feature is enabled for Windows 10/11, macOS/iOS Airplay and/or Google Cast screen mirroring.
  • Page 33 Select the ScreenBeam receiver name as shown on the TV display.  For Windows 10/11 Select Connect or Cast from the Action Center by swiping from right or simultaneously pressing the Windows key and K. Figure: Selecting receiver on Windows 10 device...
  • Page 34 Figure: Selecting receiver on Windows 11 device  For iOS or macOS Connect with Airplay from the menu bar or control center. Figure: Selecting receiver on iOS device...
  • Page 35 Figure: Selecting receiver on macOS device  For Chrome OS or Chrome browser Connect with Cast or Cast screen from the Quick Settings panel on Chrome OS or from the Chrome browser menu. Figure: Selecting receiver on Chrome OS...
  • Page 36 Figure: Selecting receiver on Chrome Browser Note: On Chrome browser, you can define a source to cast before connecting to ScreenBeam. Enter in the PIN if required. If the PIN code is not displayed, try the hidden PIN 1234 (default).
  • Page 37 Windows 10 Windows 11...
  • Page 38 macOS Select duplicate or extended screen mode if prompted. If the display has touch functionality, Windows 10/11 devices can take advantage of the touch and inking feature by selecting Allow mouse, keyboard, touch, and pen input from this device. Refer to section 4.3 USB over Network Control for more details. Windows 10 Windows 11 Note: To disconnect, follow instructions in step 5 to return to the screen mirroring menu and...

  • Page 39: Part Iv Display And Control Options

    To switch your receiver to Portrait mode, follow this procedure: Log into the receiver’s Local Management Interface. Refer to Section 5.2 Using Local Management on ScreenBeam for details. Go to Features > Display Setting > Display Orientation, and select Portrait (Rotate Left) or Portrait (Rotate Right).

  • Page 40: Projection Mode

    4.2 Projection Mode The receiver supports three projection modes when connected with a compatible wireless display application. On Windows, press the Windows logo + P keys simultaneously ( + P) to launch the display options and select a desired display mode from the options. Windows 10 Windows 11 On macOS, click the Airplay icon...
  • Page 41 HDTV. When in the Extend mode, dragging windows to the right side of the device's screen displays those windows on the HDTV, while dragging windows to the left of the HDTV screen displays them back on the device's screen. This mode allows users to display selected content on the HDTV, while all other windows remain on the device's screen.

  • Page 42: Usb Over Network Control

    4.3 USB over Network Control The ScreenBeam 1100 Flex receiver supports User Input Back Channel (UIBC) also known as USB over network control. This feature allows the use of USB HID peripheral devices from the source device to control the client device via ScreenBeam connection.

  • Page 43: Using Interactive Touch Display

    4.4 Using Interactive Touch Display ScreenBeam 1100 Flex supports wireless inking and touch with Windows 10/11 Miracast for collaboration using a touchscreen display. Users can project their preferred Windows 10/11 application and take notes on the touchscreen; the notes appear directly on the client device.

  • Page 44: Setup And Instructions

    Prepare the touch display and the USB touch cable supplied with the touch display. Connect the USB Type-A end to the ScreenBeam 1100 Flex receiver’s USB port. Connect the USB Type-B/A end to the USB Touch input on the display or projector.

  • Page 45: Ghost Inking

    4.4.5 Ghost Inking™ Ghost Inking is specific to the ScreenBeam product portfolio and solves the latency (delay) typically experienced when a touch-enabled display or projector is connected to a computer or mobile device over a network. Ghost Inking is currently included in ScreenBeam products for all customer segments in commercial, government, and education.

  • Page 46: Part V Device Management For It Administrator

    Part V Device Management for IT Administrator ScreenBeam 1100 Flex can be configured by using the ScreenBeam CMS software or accessing the ScreenBeam’s Local Management Interface (LMI). 5.1 Using ScreenBeam CMS Software ScreenBeam Central Management System (CMS) is a highly recommended complimentary tool for multi-unit deployment, configuration and administration.

  • Page 47: Method 1: Screenbeam Local Wi-Fi Network

    Connect the client device’s Wi-Fi to the wireless network (AP SSID) as shown on the TV display. Enter the password for the wireless network. By default, the password is screenbeam (case-sensitive). The receiver’s idle screen on the display will show the IP address assigned to the ScreenBeam.
  • Page 48  If the receiver is connected a network, the IP address can be identified on the receiver’s idle screen. Enter the assigned IP address into the web browser on a device. The browser may give an error stating “The connection or site is not secure or private.” Manually accept the connection as follows: ...
  • Page 49 When ScreenBeam management page appears, enter the Username Administrator and Password screenbeam (both case-sensitive). By default, the Username is Administrator, and password is screenbeam.

  • Page 50: Method 2: Network Connection Via Dhcp

    ScreenBeam Ethernet port to a DHCP enabled network. The receiver’s idle screen on the display will show the IP address assigned to the ScreenBeam. Enter this address into the web browser on a device on the same network as the ScreenBeam.

  • Page 51: Method 3: Wireless P2P Direct Connection

    5.2.3 Method 3: Wireless P2P Direct Connection Using a Windows 10/11 device, connect the device to the ScreenBeam per section 3.3 Connect using Wi-Fi Miracast. Once connected, enter https://192.168.16.1 into a web browser to access the LMI. Follow the directions from Method 1 from Step 5 on.

  • Page 52: Configuring Screenbeam

    5.3 Configuring ScreenBeam After you have logged into the LMI, you are ready to configure ScreenBeam 1100 Flex. 5.3.1 General Settings This section introduces some general settings for the receiver. 5.3.1.1 Renaming the Receiver To rename your receiver, follow this procedure: 1.

  • Page 53: Setting Up The Login Username And Password

    5.3.1.2 Setting up the Login Username and Password To modify the username and password for user login, follow this procedure: 1. Go to the Device Configuration tab page by clicking the Device Configuration tab. 2. Go to the Administrator Username and Administrator Password lines, and type new username and password in the Administrator Username and Administrator Password boxes, respectively.

  • Page 54: Setting Up The Receiver's Display Language

    5.3.1.3 Setting up the Receiver’s Display Language To set up the receiver’s display language, follow this procedure: 1. Go to the Device Configuration tab page by clicking the Device Configuration tab. 2. Go to the Display Language line, and choose a desired language from the Display Language drop-down box.

  • Page 55: Modifying The Receiver's Host Name

    5.3.1.4 Modifying the Receiver’s Host Name The host name is used to identify the receiver in a network. To modify your receiver’s host name, follow this procedure: 1. Go to the Device Configuration tab page by clicking the Device Configuration tab. 2.

  • Page 56: Setting Up Time Zone And Ntp Time Server

    5.3.1.5 Setting up Time Zone and NTP Time Server ScreenBeam 1100 Flex will synchronize its time with an NTP server. To set up a time zone and an NTP time server for the receiver, follow this procedure: 1. Go to the Device Configuration tab page by clicking the Device Configuration tab.

  • Page 57: Setting Up Wireless Display Mode

    5.3.2 Setting up Wireless Display Mode ScreenBeam 1100 Flex supports standard Wireless Display mode and Classroom Commander mode. To select a wireless display mode for your receiver, follow this procedure: 1. Go to the Features tab page by clicking the Features tab.
  • Page 58 3. Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 59: Wireless Display Over Lan

    100M/1000M Ethernet adapter (optional, but recommended) and Wi-Fi adapter are available  Stable local area network  Windows 10/11 device and ScreenBeam 1100 Flex receiver are connected to the same  Required ports: TCP 7250, TCP 7236 TCP 7250, for Miracast over LAN data stream •...
  • Page 60 3. Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 61: Setting Up Native Screen Mirroring For Macos/Ios Devices

     Stable local area network  MacOS/iOS device and ScreenBeam 1100 Flex receiver are connected to the same  Required ports: UDP 5353, TCP 47000, TCP 7000, TCP 7100, TCP 18000-18009 UDP 5353, for Multicast DNS (mDNS) discovery •...
  • Page 62 Multicast DNS Discovery is disabled and BLE Discovery is enabled. In this case, the Airplay device that connects to the same wireless network with the ScreenBeam receiver will not discover the ScreenBeam receiver if this wireless network is not the network that the ScreenBeam receiver connects to via Ethernet.
  • Page 63 5. If your streaming app can support iOS push mode, enable the iOS push mode. Otherwise, disable it. 6. Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 64: Setting Up Wireless Display Over Lan For Chrome Os Device And Device

    5.3.3.3 Setting up Wireless Display over LAN for Chrome OS Device and Device with Chrome Browser Your device can connect to ScreenBeam for wireless display, as long as the following requirements are met:  Operating system: Chrome OS 100.x (and later) with Cast, or Chrome Browser with Cast ...
  • Page 65 3. Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 66: P2P Wireless Settings

    5.3.4.1 Setting up Miracast Connection ScreenBeam 1100 Flex allows users to disable or enable Miracast connection. To set up the receiver’s Miracast connection, follow this procedure: 1. Go to the Features tab page by clicking the Features tab.

  • Page 67: Setting Up P2P Operating Channel

    5.3.4.2 Setting up P2P Operating Channel ScreenBeam 1100 Flex allows you to define an operating channel for communication between the wireless display receiver and the source device. To set up the receiver’s operating channel, follow this procedure: 1. Go to the Features tab page by clicking the Features tab.

  • Page 68: Setting Up Transmit Power

    5.3.4.3 Setting up Transmit Power ScreenBeam 1100 Flex allows users to tune down or up the transmission power of the Wi-Fi adapter for Miracast connection. To set up the receiver’s transmission power, follow this procedure: 1. Go to the Features tab page by clicking the Features tab.

  • Page 69: Security Settings

    Note: Some wireless display source device may not support PIN entry and may not be able to connect with the ScreenBeam receiver if this mode is enabled. Refer to the device’s user manual for details about enabling the PIN connection.
  • Page 70 Static and Random.  Static: When Static is selected, users can define a PIN flexibly. The static PIN will not be displayed on the connected display.  Random: A PIN code is generated randomly by ScreenBeam and displayed on the connected HDTV/projector.
  • Page 71 5. Define the period for showing the PIN on the connected display. The PIN Display Period ranges from 30 to 120 seconds. 6. Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 72: Display Settings

    Display Settings This section introduces display related features. 5.3.6.1 Setting up Display Sharing Mode ScreenBeam 1100 Flex supports three display sharing modes: Single mode, Quick Switch mode, and Multi-view mode. To select a display sharing mode, follow this procedure: Go to the Features tab page by clicking the Features tab.

  • Page 73: Setting Up Receiver Name Display For Quick Switch/Multi-View

    5.3.6.2 Setting up Receiver Name Display for Quick Switch/Multi-View ScreenBeam 1100 Flex allows customizing the display of receiver name in the Quick Switch or Multi-View mode. To set up the display of the receiver’s name, follow this procedure: Go to the Features tab page by clicking the Features tab.
  • Page 74 Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 75: Setting Up Information Display On Rtc Screen

    To set up the receiver’s information display on RTC screen, follow this procedure: Go to the Features tab page by clicking the Features tab. Go to the Display Setting section, and select a desired option from the ScreenBeam network and status information menu. Available options are: Display all, Display minimal, and Display none.
  • Page 76 Set Show “Connect to WiFi” instructions to Show or Hide. Show: The Wi-Fi connection instruction will be displayed on RTC screen.   Hide: The Wi-Fi connection instruction will not be displayed on RTC screen. Set Show “Help URL” instructions to Show or Hide. ...
  • Page 77 Here is an example after all these info are set to be hidden.

  • Page 78: Setting Up Date And Time Display On Rtc Screen

    5.3.6.4 Setting up Date and Time Display on RTC Screen To set up date and time display on RTC screen, follow this procedure: Go to the Features tab page by clicking the Features tab. Go to the Display Setting section, and set Show time & date onscreen to Show or Hide.
  • Page 79 Time and date will be displayed on the RTC screen if Show time & date onscreen is set to Show.

  • Page 80: Setting Up Local Wi-Fi Password Display On Rtc Screen

    5.3.6.5 Setting up Local Wi-Fi Password Display on RTC Screen To show or hide password for Local Wi-Fi on RTC screen, follow this procedure: Go to the Features tab page by clicking the Features tab. Go to the Display Setting section, and set Show passphrase key for Local Wi-Fi onscreen to Show or Hide.
  • Page 81 The password for the receiver’s Local Wi-Fi will be displayed on RTC screen if Show passphrase key for Local Wi-Fi onscreen is set to Show.

  • Page 82: Setting Up Wi-Fi Qr Code Display On Rtc Screen

    5.3.6.6 Setting up Wi-Fi QR Code Display on RTC Screen To show or hide Wi-Fi RQ code on RTC screen, follow this procedure: Go to the Features tab page by clicking the Features tab. Go to the Display Setting section, and set Show Wi-Fi QR code onscreen to Show or Hide.
  • Page 83 Click the Apply button, and then click OK on the pop-up message box to confirm. The QR code for the selected Wi-Fi will be displayed on RTC screen if Show Wi-Fi QR code onscreen is set to Show.

  • Page 84: Managing Hdmi/Vga Port Output

    5.3.6.7 Managing HDMI/VGA Port Output To set up HDMI/VGA port output, follow this procedure: 1. Go to the Features tab page by clicking the Features tab. 2. Go to the Display Setting section, and select a desired option in the HDMI/VGA Port Power management drop-down box.
  • Page 85 Display Off: Selecting this option, the HDMI/VGA output will be turned off after the  defined idle time expires. Users can define the idle time (1-9999 seconds) in the wait time box. 3. Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 86: Waking Up The Receiver

    5.3.6.8 Waking up the Receiver When the receiver runs screen saver or when its HDMI/VGA port output is turned off, it can be waked up by any one of two events: scanning and connecting. Note: The Wake Up feature is available when HDMI/VGA Port Power management is set to Screensaver or Display Off.

  • Page 87: Adjusting Tv Screen Size

    5.3.6.9 Adjusting TV Screen Size To adjust the size of your TV screen, follow this procedure: 1. Go to the Features tab page by clicking the Features tab. 2. Go to the Display Setting section, and select a desired option in the Adjust TV Screen Size drop-down box.

  • Page 88: Setting Up Hdmi-Cec

    5.3.6.10 Setting up HDMI-CEC To set up the HDMI-CEC feature, follow this procedure: 1. Go to the Features tab page by clicking the Features tab. 2. Go to the Display Setting section, and set the HDMI-CEC feature to On or Off. After this function is enabled, the receiver can wake up the connected display device and the display device will switch to the source that the receiver connects to.

  • Page 89: Updating The Receiver's Background Image

    5.3.6.11 Updating the Receiver’s Background Image To update the receiver’s background, follow this procedure: 1. Go to the Features tab page by clicking the Features tab. 2. Go to the Display Setting section, and click the Browse button next to the Background Image box.
  • Page 90 5. A confirmation message appears. Click OK to continue. 6. After a while, the background image will be updated. You can check it on the connected display.

  • Page 91: Updating The Receiver's Screen Saver Image

    5.3.6.12 Updating the Receiver’s Screen Saver Image To update the receiver’s screen saver, follow this procedure: 1. Go to the Features tab page by clicking the Features tab. 2. Go to the Display Setting section, and click the Browse button next to the Screen Saver Image box.
  • Page 92 5. A confirmation message appears. Click OK to continue. 6. After a while, the screen saver image will be updated. You can check it on the connected display when the screen saver is running.

  • Page 93: Digital Signage Settings

    5.3.7 Digital Signage Settings ScreenBeam receiver’s Digital Signage mode can turn your display into a digital signage player. To set up the receiver’s digital signage mode, follow this procedure: Go to the Digital Signage tab page by clicking the Digital Signage tab.
  • Page 94 Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 95: Network Settings

    5.3.8 Network Settings This section introduces settings about network connection, such as local Wi-Fi networking mode, CMS interface/Internet WAN interface assignment, connection and TCP/IP settings for Ethernet/Wireless interface, etc. 5.3.8.1 Setting up Local Wi-Fi Network Mode The receiver provides a local Wi-Fi network for wireless display over LAN and receiver management.
  • Page 96 Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 97: Setting Up An Interface For Cms Connection

    5.3.8.2 Setting up an Interface for CMS Connection ScreenBeam 1100 Flex allows customizing an interface for connecting to CMS. To define an interface for connecting to CMS, follow this procedure: Go to the Network Settings tab page by clicking the Network Settings tab.

  • Page 98: Setting Up An Internet Wan Interface

    5.3.8.3 Setting up an Internet WAN Interface The receiver’s local Wi-Fi can be routed to the receiver’s wired or wireless interface for Internet access. To define an interface for connecting to Internet, follow this procedure: Go to the Network Settings tab page by clicking the Network Settings tab. Go to the Interface Feature Assignment section, and select an option from the Select Internet WAN Interface box.

  • Page 99: Renaming Ethernet Interface's Network Name

    5.3.8.4 Renaming Ethernet Interface’s Network Name Ethernet interface’s network name can remind users which Ethernet network the receiver is connecting to. To rename the Ethernet interface’s network name, follow this procedure: Go to the Network Settings tab page by clicking the Network Settings tab. Go to Network Interface Settings >...

  • Page 100: Setting Up The Receiver's Ip Address

    5.3.8.5 Setting up the Receiver’s IP Address The receiver provides both Ethernet and wireless interfaces for connecting to networks. Separate IP configuration is required for these interfaces. By default, the receiver is set to obtain an IP address automatically. Make sure a DHCP server is available on your network. IP configuration procedures for the Ethernet and the wireless interfaces are same.
  • Page 101 Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 102: Specifying A Dns Server For The Receiver

    5.3.8.6 Specifying a DNS Server for the Receiver The receiver provides both Ethernet and wireless interfaces for connecting to networks. Separate DNS configuration is required for these interfaces. By default, the receiver is set to obtain DNS configuration automatically. DNS configuration procedures for the Ethernet and the wireless interfaces are same. To specify a DNS server for the receiver, follow this procedure: Go to the Network Settings tab page by clicking the Network Settings tab.
  • Page 103 Click the Apply button, and then click OK on the pop-up message box to confirm.

  • Page 104: Local Wi-Fi Settings

    5.3.9 Local Wi-Fi Settings ScreenBeam 1100 Flex provides a local Wi-Fi network for wireless display over LAN (such as Windows 10/11 Infracast, Apple Airplay, and Google Cast) and receiver management. To set up the receiver’s local Wi-Fi, follow this procedure: Go to the Local Wi-Fi tab page by clicking the Local Wi-Fi tab.
  • Page 105 broadcasted when this setting is disabled. If SSID Broadcast is disabled, you need to manually connect your device to the receiver’s Local Wi-Fi. Click the Apply button, and then click OK on the pop-up message box to confirm. To specify a DNS server for the Local Wi-Fi, go to the Network Settings tab page, and then go to Local Wi-Fi Network >...

  • Page 106: Receiver Management Access Settings

    Note: It is recommended to use DNS configuration for CMS Server.  CMS Communication Port: It is the communication port between a ScreenBeam receiver and the ScreenBeam CMS. The port range is from 5000 to 65535. By default, 7237 is used. ...

  • Page 107: Specifying A Port For The Receiver's Lmi

    5.3.10.2 Specifying a Port for the Receiver’s LMI To specify a communication port for the receiver’s local management interface, follow this procedure: Go to the Management Access tab page by clicking the Management Access tab. Go to the Central Management System Settings section, and define a port for Web Communication Port.

  • Page 108: Setting Up Local Management Interface Access

    5.3.10.3 Setting up Local Management Interface Access The receiver’s Local Management Interface (LMI) is used to manage the receiver locally. To set up the receiver’s LMI access, follow this procedure: Go to the Management Access tab page by clicking the Management Access tab. Go to the Local Management Interface Access Settings section, and select an option from the Local Management Interface Access box.
  • Page 109 Click the Apply button, and then click OK on the pop-up message box to confirm. The receiver reboots, and new setting takes effect after the reboot.

  • Page 110: Part Vi Updating Firmware For The Receiver

    1. Download the latest firmware from ScreenBeam’s website: https://support.screenbeam.com. 2. Log into Local Management Interface on ScreenBeam 1100 Flex, and go to the Firmware Upgrade tab page by clicking the Firmware Upgrade tab. On the Firmware Upgrade tab page, users can check the current firmware version in...
  • Page 111 3. Select the Browse button next to the From a local PC box. 4. The Open window appears. Navigate to the extracted firmware file folder. Select the firmware file (“install.img”) and click the “Open” button to continue. 5. Click the Apply button, and then click OK on the pop-up message box to continue.
  • Page 112 6. The web server starts transferring the firmware file to the receiver. 7. The receiver reboots and upgrades itself after the file is uploaded successfully. Firmware upgrade status is displayed on the connected display. 8. When the receiver returns to the idle screen, the receiver has been upgraded. You can check the version number in the lower right corner of the display.

  • Page 113: Updating Firmware From The Internet

    To upgrade your receiver from the Internet, follow this procedure: 1. Ensure the receiver is connected to a network that has access to the Internet. 2. Log into Local Management Interface on ScreenBeam 1100 Flex, and go to the Firmware Upgrade tab page by clicking the Firmware Upgrade tab.
  • Page 114 4. Click the Update Now button to start firmware update for the receiver. 5. The receiver downloads firmware from the Internet update server. 6. The receiver reboots and upgrades itself after the file is downloaded successfully. Firmware upgrade status is displayed on the connected display. 7.

  • Page 115: Firmware Update Using A Usb Flash Drive

    6.2 Firmware Update using a USB Flash Drive To update the receiver’s firmware with a USB flash drive, follow this procedure: 1. Download the latest firmware from ScreenBeam’s website: https://support.screenbeam.com. 2. Extract the downloaded file and copy the “install.img” file and the “autorun” file folder to the root directory of a USB flash drive.

  • Page 116: Part Vii Receiver Maintenance

    Part VII Receiver Maintenance This section introduces setups for receiver maintenance. 7.1 Setting up Receiver Auto Reboot After a long period of continuous running, the receiver may not react as responsively as it should be. We can restart the device to restore its responsiveness. To set the receiver to reboot automatically, follow this procedure: 1.

  • Page 117: Setting Up Receiver Logging

    7.2 Setting up Receiver Logging ScreenBeam receiver can save events in logs, and these logs can be retrieved by the receiver’s LMI or ScreenBeam CMS. Refer to the ScreenBeam CMS user guide for detail. To set up the receiver’s logging, follow this procedure: 1.

  • Page 118: Exporting Receiver Log With Lmi

    7.3 Exporting Receiver Log with LMI To export logs from the receiver, follow this procedure: 1. Ensure receiver logging is enabled. Refer to Section 7.2 Setting up Receiver Logging for details. 2. Log into the receiver’s LMI, and go to the Maintenance tab page. 3.

  • Page 119: Setting Up The Reset Button

    7.4 Setting up the Reset Button ScreenBeam 1100 Flex provides a button to reset the receiver to default settings. It is the reset button. ScreenBeam 1100 Flex also allows users to disable all functions of this button. To enable or disable functions of the reset button, follow this procedure: 1.

  • Page 120: Setting Up The Usb Ports

    7.5 Setting up the USB Ports ScreenBeam 1100 Flex provides two USB 2.0 ports and one USB 3.0 port for performing various tasks, such as receiver configuration, touch screen support, and USB firmware upgrade. ScreenBeam 1100 Flex also allows users to disable functions of these ports.

  • Page 121: Viewing System Uptime

    7.6 Viewing System Uptime To view the receiver’s system uptime, follow this procedure: 1. Log into the receiver’s LMI and go to the Maintenance tab page. 2. Go to the System Uptime section, and check the time period displayed on the Time since last boot line.

  • Page 122: Rebooting The Receiver

    7.7 Rebooting the Receiver To reboot your receiver, unplug the power adapter from the power outlet, wait 5 seconds and then plug it in. If you can’t access the receiver locally, you can reboot the receiver through the receiver’s LMI. To reboot the receiver with LMI, follow this procedure: 1.

  • Page 123: Resetting The Receiver To Default

    7.8 Resetting the Receiver to Default To reset all settings of the receiver to default, follow this procedure: Power on the receiver and wait until the receiver’s idle screen appears. Ensure that the Push Button feature is enabled. Refer to Section 7.4 Setting up the Reset Button for details.
  • Page 124 5. If you want to reset the receiver but retain the network connection settings and remote management settings, click the Reset button next to “Soft Reset”. When you soft-reset your receiver through the LMI, the following settings will be retained: ...

  • Page 125: Tips For Optimal Performance

    7.9 Tips for Optimal Performance For optimal performance, you can try these tips: • Keep the receiver within line-of-sight of the source device. Doing this will help ensure the receiver receives the best possible signal. The receiver's optimal wireless range is within 30 feet from the source device. However, •...

  • Page 126: Appendix I Troubleshooting And Faqs

    Appendix I Troubleshooting and FAQs This chapter describes some problems you may encounter using ScreenBeam 1100 Flex, and possible solutions to those problems. Also included are frequently asked questions (FAQs), and answers to those questions. Troubleshooting I'm not seeing anything on my HDTV screen after powering on the receiver.
  • Page 127 I encounter connection failure with ScreenBeam 1100 Flex and my device can’t connect to it any more.  Reboot the ScreenBeam 1100 Flex and try connection again. Or, reboot your device (laptop/Ultrabook/tablet/smartphone) and try connection again.  Reboot both the ScreenBeam 1100 Flex and your device and try connection again.

  • Page 128: Faqs

     Cast screen Visit ScreenBeam 1100 Flex compatibility page for the recommended Miracast devices. Do I need to install drivers/apps to use the ScreenBeam 1100 Flex Receiver?  For Windows 11/10, you only need to install the latest Windows updates.
  • Page 129 How to set the ScreenBeam video output to fit a display with aspect ratio other than 16:9? ScreenBeam receiver's HDMI output supports 16:9 resolutions only. Can I extend my Windows desktop to the HDTV or Projector from my Miracast device? Yes.
  • Page 130 No. You can only connect to one ScreenBeam 1100 Flex at a time. Can ScreenBeam 1100 Flex support wireless touch and inking? Yes. ScreenBeam 1100 Flex supports UIBC. The source device must have a Windows 10/11 system and meet the following hardware requirements: ...

  • Page 131: Appendix Ii Notices

    Warranty Statement may not apply to the customer. GPL Info For GNU General Public License (GPL) related information, go to https://opensource.screenbeam.com. Technical Support For FAQs, troubleshooting tips, documentation, firmware update and support, visit: https://support.screenbeam.com To open a ticket for support, visit: https://support.screenbeam.com/ticket...

  • Page 132: Fcc Warning

    FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the condition that (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

  • Page 133: Ce Statement

    CE Statement Manufacturer’s name: ScreenBeam Inc. Address: 220 Devcon Dr., San Jose, CA 95112 USA Product Name: ScreenBeam 1100 FLEX; Trade Mark: ScreenBeam Model Number: SBWD1100F Operating Temperature: 0° C to 40° C This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
  • Page 134 RF Specification: Restrictions in the 5 GHz band: According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria(BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland(IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy(IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg(LU), Hungary(HU), Malta(MT), Netherlands(NL), Austria(AT), Poland (PL), Portugal(PT), Romania (RO), Slovenia(SI), Slovakia (SK),Finland...

  • Page 135: Telec Statement

    TELEC Statement Indoor use only (except when communicating with 5.2 GHz high power base stations or relay stations).

  • Page 136: Ncc 警语

    NCC 警语 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加 大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通 信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信， 指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫 療用電波輻射性電機設備之干擾...

This manual is also suitable for:

Sbwd1100f

Table of Contents