over the local network.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
V.3.4
P2P Wireless Settings
This section introduces settings for Miracast connection, P2P operating channel and
transmission power.
V.3.4.1 Setting up Miracast Connection
ScreenBeam 1100 Plus allows users to disable or enable Miracast connection.
To set up the receiver's Miracast connection, follow this procedure:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the P2P Wireless Setting section, and set Miracast Connection to Enable or
Disable.
Note: Windows and Android Miracast devices are not allowed to connect to the receiver
after Miracast Connection is set to Disable.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
51