Setting Up The Receiver's Display Language - ScreenBeam 1100 Plus User Manual

3. Click the Apply button, and then click OK on the pop-up message box to confirm.
V.3.1.3 Setting up the Receiver's Display Language
To set up the receiver's display language, follow this procedure:
1. Go to the Device Configuration tab page by clicking the Device Configuration tab.
2. Go to the Display Language line, and choose a desired language from the Display
Language drop-down box.
Currently, English is available.
Note: This will change the language displayed on the TV screen, not the one on the
configuration webpage.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
44