Setting Up Receiver Name Display For Quick Switch - ScreenBeam 1100 Plus User Manual

Currently, Multiview is not supported for Airplay connections or Chromecast
•
connections.
Click the Apply button, and then click OK on the pop-up message box to confirm.
3.
V.3.6.2 Setting up Receiver Name Display for Quick Switch
ScreenBeam 1100 Plus allows customizing the display of receiver name in the Quick Switch
mode.
To set up the placement of the receiver's name, follow this procedure:
Go to the Features tab page by clicking the Features tab.
1.
2. Go to the Display Setting section, and ensure that Display Sharing Mode is set to
Quick Switch.
Set Show Receiver Name to Always.
3.
The Show Receiver Name feature provides two options, as shown below:
Always: The receiver's name will be displayed on the connected TV when an active

connection session is present.
Don't show: The receiver's name will not be displayed on the connected TV when

an active connection session is present.
Note: If this option is selected, the receiver name placement is not available.
59