Ii.2.2 Wireless Connection - ScreenBeam 1100 Plus User Manual

into the receiver's LMI.
 Refer to Section V.3.8.5 Setting up the Receiver's IP Address for detail on how to set
up the receiver's IP address.
 Refer to Section V.3.8.6 Specifying a DNS Server for the Receiver for detail on how to
set up the receiver's DNS server.
II.2.2 Wireless Connection
ScreenBeam 1100 Plus receiver provides a built-in WLAN adapter, which allows the receiver
to wirelessly connect to your network. It is required to set up the wireless connection
parameters before starting the connection.
To connect the receiver to a wireless network, follow this procedure:
1. Go to the receiver's LMI, and set IP address assignment and DNS assignment to auto
in the TCP/IP Settings section.
Note:
If you want to set the receiver's IP address or DNS server to static, consult your

network administrator.
Refer to Section V.2 Using Local Management on ScreenBeam for detail on how to log

into the receiver's LMI.
Refer to Section V.3.8.5 Setting up the Receiver's IP Address for detail on how to set

up the receiver's IP address.
Refer to Section V.3.8.6 Specifying a DNS Server for the Receiver for detail on how to

set up the receiver's DNS server.
2. Go to LMI > Network Settings > Network Interface Settings > Wireless Interface
8