Click the Apply button, and then click OK on the pop-up message box to confirm.
3.
V.3.10.2
Specifying a Port for the Receiver's LMI
To specify a communication port for the receiver's local management interface, follow this
procedure:
Go to the Management Access tab page by clicking the Management Access tab.
1.
2.
Go to the Central Management System Settings section, and define a port for Web
Communication Port.
Web Communication Port: It is the communication port for the receiver's Local
Management Interface. The port range is from 5000 to 65535 (except 5555). By default,
443 is used.
78