Part Vii Receiver Maintenance; Vii.1 Setting Up Receiver Logging - ScreenBeam 1100 Plus User Manual

Part VII Receiver Maintenance

This section introduces setups for receiver maintenance.

VII.1 Setting up Receiver Logging

ScreenBeam receiver can save events in logs, and these logs can be retrieved by the
receiver's LMI or ScreenBeam CMS. Refer to the ScreenBeam CMS user guide for detail.
To set up the receiver's logging, follow this procedure:
1. Log into the receiver's LMI, and go to the Features tab page.
2. Go to the Display Setting section, and set Receiver Logging to Enable or Disable.
Enable: The receiver will record logs when there are events happen.

Disable: The receiver will NOT record any events.

3. Click the Apply button, and then click OK on the pop-up message box to confirm.
86