ScreenBeam 1100 Plus User Manual page 94

To reset the receiver with LMI, follow this procedure:
1. Log into the receiver's LMI and go to the Maintenance tab page.
2. Go to the Device Utilities section and click the Reset button next to "Reset". This button
works the same as the physical button on the receiver.
3. Click OK on the pop-up message box to confirm.
4. The receiver reboots, and the receiver is reset to factory defaults after the reboot.
5. If you want to reset the receiver but retain the network connection settings and remote
management settings, click the Reset button next to "Soft Reset".
When you soft-reset your receiver through the LMI, the following settings will be retained:
CMS Server IP address

CMS communication port

 Receiver IP setting (DHCP or Static IP)
 Receiver IP address
 Receiver Subnet Mask
 Receiver Gateway
 Receiver DNS setting (Dynamic or Static)
Primary DNS

Secondary DNS

 Host Name
 Wireless connection settings
 Timezone
90