Install The Access Point On A Wall - Extreme Networks ExtremeWireless AP302W Installation Manual

Install the Access Point

Install the Access Point on a Wall

Learn how to install the access point to a solid flat surface such as a wall using the in-box wall plate
stainless-steel bracket or the -EXT accessory.
Before You Begin
•
The mounting surface must be able to support the access point in all environmental conditions.
•
The mounting surface must be flat.
Hardware required for wall installation:
•
One AP302W access point
•
One in-box wall plate stainless-steel bracket
•
Two pan head M3.5×16 mm long screws for solid wall or anchor attachment
•
Two 25 mm long white plastic screw-in anchors
Note
Provide your own Phillips screwdriver, a torx screwdriver, and a pencil.
About This Task
Install the access point on a flat surface such as a wall or a solid flat ceiling using the in-box wall plate
stainless-steel bracket.
Install the Access Point on a Wall
ExtremeWireless™ Access Point AP302W 19