Extreme Networks ExtremeWireless AP302W Installation Manual page 30

Install the Access Point on a EU Model Junction Box
Using the ACC-BKT-AX-WP-EXT Accessory
6. Connect the Ethernet cable or the RJ45 flat cable to the access point.
Figure 12: Attach the Ethernet cable or RJ45 cable to the access point rear pass
through port
7. Align the access point back slots with the stainless-steel bracket access point holding tabs, and then
slide the access point onto the bracket until it is fully seated in place.
30 ExtremeWireless™ Access Point AP302W
Install the Access Point