Install The Access Point On A Wall - Extreme Networks ExtremeWireless AP560h Installation Manual

Install the Access Point
Table 6: AP560h mounting brackets and accessories usage (continued)
Mounting bracket/
accessory and part
number
WS-MBO-POLE01
(#30520); bracket;
also known as
the pole mounting
bracket
MBO-ART02; 10 in.
2-axis articulating
mounting bracket
Note
The access point cannot be installed without the mounting bracket.

Install the Access Point on a Wall

Before You Begin
The access point is used with the KT-147407-02 bracket parts for wall installation.
The KT-150173-01 extension arm may also be used with the access point and the
KT-147407-02 bracket parts for wall and flat surface installation.
Wall install
No
Yes
Install the Access Point on a Wall
Pole install
Yes
Yes
ExtremeWireless™ AP560h Access Point
Notes
If the pole diameter
is <= 1.0 in. (25.4
mm), use small
cable clamp. If the
pole diameter is
between 5.0 in.
(127.0 mm) – 7.0
in. (178.0 mm),
use large cable
clamp. For any
other pole diameter,
provide your own
stainless steel cable
clamp. The band
must be 0.5 in.
(12.7mm) wide. The
POLE01 bracket
can be used only
when paired with
the MBO-ART02
bracket.
The articulating
mounting bracket is
used with POLE01
bracket for pole
install. The wall
must be strong
enough to support
the access point
during inclement
weather.
17