Extreme Networks ExtremeWireless AP302W Installation Manual page 29

Install the Access Point
4. Line up the wall plate bracket large hole against the junction box face plate and run the other end of
the RJ45 cable through the wall plate bracket hole.
Figure 11: Feed the RJ45 cable through the large center hole on the stainless-steel
bracket face
5. Using the aligned holes, attach the bracket with the extension accessory around the junction box
using the 6-32×35 mm long screws included with the -EXT bracket.
Install the Access Point on a EU Model Junction Box
Using the ACC-BKT-AX-WP-EXT Accessory
ExtremeWireless™ Access Point AP302W 29