Extreme Networks ExtremeWireless AP302W Installation Manual page 32

Install the Access Point on a Desk Stand
•
One flat head T8 security torx M2.5×6.5 mm long locking screw
•
Two Phillips flat head M3.5×12 mm long self-tapping wood screws, if you want to fix the desk stand
in place
Note
Provide your own torx screwdriver.
About This Task
Use the desk stand accessory to install the access point to a desk.
Note
The desk stand accessory must be purchased separately. For order information, see
Point and Accessory Box Contents and Order Information
Procedure
1. Place the desk stand on the installation surface.
Figure 14: Desk stand
2. If desired, attach the desk stand to the installation surface using two Phillips flat head M3.5×12 mm
long self-tapping wood screws.
32 ExtremeWireless™ Access Point AP302W
Install the Access Point
Access
on page 16.