Install The Access Point On Drywall Or Wood Wall, Or To A Solid Flat Ceiling - Extreme Networks ExtremeWireless AP310i Installation Manual

Install the Access Point
Table 10: Bracket and accessory usage for various installation options (continued)
Mounting
bracket or
accessory
37210 flat
metal easy-
attach
adapter;
used with
main
mounting
bracket
37211 WS-
MBI-
DCFLUSH
bracket
BRKT-0001
47A-01;
beam clip
accessory
30525 WS-
CAB-RJ45-
FLT01
accessory
Install the Access Point on Drywall or Wood Wall, or to a Solid Flat
Ceiling
About This Task
The access point is installed on a drywall or wood wall or to a solid flat ceiling using:
•
#37201, stainless-steel main mounting bracket that ships with the unit
•
#30516, WS-MBI-WALL04 bracket, two Phillips pan-head screws, and screw-in anchors
Wall Solid Ceilin Ceiling
instal flat g install
l ceilin install (protruded
g (T- T-bar)
instal bar)
l
Yes Yes No No
No No Yes Yes
No No No No
No Yes Yes No
Note
The WALL04 bracket and screw-in anchors are used only for drywall or wood wall
mounting.
Install the Access Point on Drywall or Wood Wall, or to a
Junctio Beam
n box install
install
No No
No No
No Yes
No No
ExtremeWireless™ AP310i/e Access Points
Solid Flat Ceiling
Ceiling T-bar Notes
tile widths
protrusio
n
No N/A Wall mount,
ceiling
mount, or
install on
any solid
surface.
Yes 9/16 in., Protruded
3/2 in., ceiling
15/16 in. mount with
varying
widths.
No N/A The beam
clip is
attached to
the main
mounting
bracket.
No N/A This
accessory
can be used
only with
ceiling
mount
brackets
listed in this
table.
15