Install The Access Point On A Wall - Extreme Networks ExtremeWireless AP560i Installation Manual

Install the Access Point
6. Torque the nuts to 60 in-lbs.
Figure 3: AP560i flat surface installation with metal "L" brackets
What to Do Next
Install the Plastic Service Panel on the Access Point

Install the Access Point on a Wall

Before You Begin
The access point is used with the KT-147407-02 bracket parts for wall installation. The KT-150173-01
extension arm is also used with the access point and the KT-147407-02 bracket parts for wall and flat
surface installation.
Other wall install options include using the:
•
MBO-ART02 bracket
The following hardware is required when installing the access point on a flat surface using the
KT-147407-02 bracket:
•
One access point
•
Flat part of the KT-147407-02 bracket with two holes on the metal surface (see
KT-147407-02
•
1-axis tilt bracket (see
•
KT-150173-01 extension arm (see
•
Six M6 screws
•
Four M6 size hex-head screws
•
Screw-in anchors if the access point is being mounted on a wood wall or a concrete surface.
Note
The M6 hex-head screws and screw-in anchors must be provided by the installer.
bracket).
Figure 5 on page 24).
Figure 6
Install the Access Point on a Wall
on page 37.
on page 25).
ExtremeWireless™ AP560i Access Point
Flat part of the
21