Table of Contents
Advertisement
Local access to the Zone Ctrl II
Local access to the Zone Ctrl II
You can use the following items as a local user interface to an Open controller. These items let you access the
controller information, read sensor values, and test the controller.
Connect...
Field Assistant
1
application
Equipment Touch
device
1
Requires a USB Link (Part #USB-L)
2
See the Equipment Touch Installation and Setup Guide for detailed instructions.
CAUTION If multiple controllers share power but polarity was not maintained when they were wired, the
difference between the controller's ground and the computer's AC power ground could damage the USB Link and
the controller. If you are not sure of the wiring polarity, use a USB isolator between the computer and the USB
Link. Purchase a USB isolator online from a third-party manufacturer.
These are accessory items that do not come with the controller.
Zone Ctrl II and
VAV Zone II Secondary Duct Installation and Start-up Guide
Error! No text of specified style in document.
To the controller's...
Local Access port
Rnet port
2
touchscreen
For...
Temporary user interface for start-up
Temporary or permanent user interface
for start-up
34
CARRIER CORPORATION ©2019
All rights reserved
Advertisement
Table of Contents
