To Set Up The Driver; Driver - Carrier Zone Ctrl II Installation And Startup Manual

To set up the driver

After discovering your Zone Ctrl II, you may want to change the driver's properties in the i-Vu® interface to suit
your application.
1
On the i-Vu® navigation tree, right-click the Zone Ctrl II.
2
Select Driver Properties and make changes if needed.

Driver

On the Driver > Update tab, you can get a Module Status and add, update, or delete the driver and the
touchscreen file.
1
To update the driver, do one of the following:
If the driver is...
In the Driver Version drop-down list
Not in the Control Program drop-
down list
2
To change, delete, or upload a screen file, click Add under Screen File and browse to your touchscreen file or
select from the drop-down list..
3
Click Continue. When message appears File added successfully, click Close.
4
Click Close again.
5
Click the Download button.
Zone Ctrl II and
VAV Zone II Secondary Duct Installation and Start-up Guide
Error! No text of specified style in document.
Select the driver and click Apply or Accept..
a. Click Add.
b. Browse to select the driver.
c. Click Open.
d. Click Continue.
e. Click Apply or Accept.
35
To set up the driver
CARRIER CORPORATION ©2019
All rights reserved