Opening An Internet Page - Viavi 6000A V2 User Manual

Chapter 7 Applications
Web browser
Opening an
internet page
54
Fig. 26 Web Browser page
Once the Web Browser is displayed, you must enter the internet address.
1 Set the cursor in the address bar:
a Use the mouse connected via USB port on the 6000A V2 Plat-
form or the mouse of the PC if the screen is deported via VNC
application on the PC.
b Click on the softkey Mouse
This allows to move the cursor toward the address bar, and to
turn to cursor.
2 Once the cursor set onto the address bar, enter the address:
a Using a keyboard connected to the 6000A V2 Platform USB port
or the keyboard of the PC with a deport of the screen via VNC,
enter the entire address of the site to be opened.
b If none keyboard is available, click on Keyboard
the virtual keyboard and enter the address using touchscreen.
3 Push Enter to validate.
The page opens
If an error message is displayed in place of the internet page, verify
the address you typed, or check the Web configuration (see
uring the Web access" page
User Manual 76100000200 Rev. 001
so that it becomes
53).
.
to display
"Config-