Installation From Viavi Server - Viavi 6000A V2 User Manual

Installation from
Viavi Server
4 According to your region, click on the one of the following icon to
download the archive.
Download from European server
Download from North American server
Download from Singapore server
5 In the new dialog box displayed, click on Save to save the exe file
on the PC.
6 Once completed, connect the USB memory stick to the PC and
follow the instructions chapter
stick" on page 147, from
The update can be performed directly onto the equipment, using the
Viavi server.
1 Connect the 6000A V2 Platform to a PC via an Ethernet link.
2 On the Home page, press System Settings key to open the
System Settings page.
3 In I/O Interfaces, on the line Ethernet, select Mode: Dynamic.
4 In the Upgrade Server box:
– On the line Address Type, select Viavi Server
The address 6k.updatemyunit.net is automatically displayed.
5 Select if the new release for 6000A V2 Platform must be automati-
cally detected (Enable) or not (Disable). See
upgrade on Viavi Server" on page
Fig. 93 Configuration of the Viavi Server
6 In the I/O Interfaces box:
– On the line Use proxy, select No, Manual or Auto wether a
proxy is used or not.
7 Press menu key Exit to return to Home page.
8 Press, in succession the menu keys:
Software Upgrade > Upgrade via
The message Verify IP address of PC server appears.
9 Click on Continue.
User Manual 76100000200 Rev. 001
Chapter 16 Maintenance and Troubleshooting
"Installation from a USB memory
step 2.
148.
Expert Tools > Upgrades >
Ethernet.
Maintenance procedure
"Checking new
145