File Parameters - Viavi 6000A V2 User Manual

Chapter 6 Scope
Configuring the P5000i Scope

File parameters

38
Once the line is selected, you can also add a new profile, clicking on the
Add Button (see "Adding a new profile" page
Tip
On the line Tip, select the tip set onto the scope to connect fiber for
inspection.
Capture button (only with P5000i)
This parameter allows to select the action of the Quick Capture button
onto the Scope (see
Freeze & Test
Freeze image
Auto Center (only with P5000i)
This parameter allows to select if the scope image must be centered on
screen (select Yes) or not (select No).
The File menu allows to enter a file name for saving scope test results.
On the line Filenaming, use the edition keypad, which will display by
clicking on the right arrow key, to enter a specific name for the file. You
can enter manually a name and/or use pre-defined parameters (Fiber Id,
Cable Id, Locations...).
Fig. 16 Edition keypad for naming scope file
To add a logo to a report generated from test results, select Logo param-
eter and press right direction key to display the file explorer page and
select the image which will be used as logo on the report page (see
"Generating a report" on page
Click on menu key Load to validate the selection. The screen returns to
configuration page and displays the file path in the Logo parameter.
User Manual 76100000200 Rev. 001
Figure 14 on page
pressing the button will automatically perform a
test of fiber and freeze the result
pressing the button onto the Scope will
automatically freeze the live image.
46).
40).
36):
Predefined
parameters for
naming files