Cleaning; Cleaning Plates And Housings; Cleaning The Screen; Cleaning The Optical Cable Connector - Viavi 6000A V2 User Manual

WIFI key
4
5
6
7

Cleaning

Cleaning plates
The front and rear plates and the housings may become tarnished with
handling. To clean them, use only a rag moistened with soapy water.
and housings
Never use any product containing acetone, trichloro-ethylene, benzine or
alcohol, as these will attack the printed markings.
Cleaning the
To clean the screen, use an antistatic product.
screen
Cleaning the
–
optical cable
connector
–
User Manual
Fig. 89 WIFI / Bluetooth option installation
Set back the cover, then the module pack onto the base pack
If necessary plug the equipment to charge the battery
Switch on the 6000A V2 Platform.
Press H hard key to display the Home page and press System
OME
Settings menu key to display the WIFI/Bluetooth parameters..
If the options have not been detected, turn off the instrument and
check the installation into the base.
Use a non-linting type of paper, such as Joseph paper, soaked in
isopropylic alcohol.
Pay particular attention to the polished face of the fiber, rubbing it in
a direction perpendicular to the axis of the fiber.
76100000200 Rev. 001
Chapter 16 Maintenance and Troubleshooting
Bluetooth
dongle
Maintenance procedure
141