Transferring The Interface - Viavi 6000A V2 User Manual

Transferring the Interface

Click to install TightVNC software
on your PC (not mandatory)
Chapter 9 Transferring the 6000A V2 Platform Interface
Note the 6000A V2
Platform IP Address
Fig. 36 Example of configuration for Ethernet
3 Wait about 10 seconds the connection is established.
The 6000A V2 Platform Interface can now be transferred onto the PC, or
the internal memory/USB key contents can be transferred on PC.
Once the connection is established between the 6000A V2 Platform and
the PC, proceed as follow:
1 Open Internet Explorer on the PC.
2 Considering 10.33.17.113 is the IP Address of the 6000A V2 Plat-
form (as shown
in the Internet Explorer window:
http://10.33.17.113:5800
3 Press Enter to validate.
The screen of the 6000A V2 Platform appears offset on your PC.
Fig. 37 VNC window
User Manual 76100000200 Rev. 001
Figure 36 on page
Transferring the Interface
67), enter the following address
67