Creating A Report; Configuring The Report; Creating The Report - Viavi 6000A V2 User Manual

Creating a report

Configuring the
report
Creating the
report
Once the results page of a function is opened (example: OTDR trace,
Power Meter results...), it can be exported in a report, using the 6000A
V2 Platform.
To configure the report and choose the format of the report file:
1 On the Home page, press System Settings key to reach the
System Settings page.
2 In the Printer box, on the line Printer, select File (Formatted).
Choosing this option, you can save the open file in a JPG, PNG or
PDF file report, exactly as if the file was printed on paper.
Therefore, if the file is too large for one A4 page, several JPG, PNG
or PDF files will be created.
3 On the line File format, select if the report file will be a JPG, PNG or
PDF file.
4 To display a Logo on the upper right of the report pages, click on
Logo line and select the Logo to be displayed on the upper right of
the page:
a Press to open the edition keypad
b Enter the path of the logo file with its extension (example: disk/
Logo.jpg)
c Press
Fig. 52 Example of Report configuration
1 Open the file to be saved in a report in JPG, PNG or PDF format
2 If necessary, make the modifications on the file/trace (see user
manual of the 8100 OTDR Modules for OTDR trace files).
3 Set the trace view as wished.
User Manual 76100000200 Rev. 001
to validate.
Chapter 10 File management

Creating a report

85