Chapter 16 Maintenance and Troubleshooting
Maintenance procedure
Installing a new
version of the
software
Downloading from
Internet
144
Fig. 92
Help page
When a new software version is loaded, there is a risk of re-initializa-
tion of the internal memory. Before installing the new software, it is
therefore advisable to save the results in the memory, using the
function called up by the
Do not interrupt the installation process, as this could damage the
instrument.
To avoid any interruption of the installation procedure, the 6000A V2
Platform must be operating on the mains: if the procedure is started
while operating on battery, a message indicates that the instrument
must be connected to the mains.
When the software is obtained from the Internet, it must be saved on a
storage medium before the software upgrade of the product can be
carried out. To do this:
1
Open Internet Explorer
2
In Internet Explorer, enter the address:
unit.net
3
Click on the link: «T-BERD®/MTS-6000 and 6000A Platform with
SN > 10000»
User Manual
76100000200 Rev. 001
F
button.
ILE
http://www.updatemy-
Save