Sending Files By Mail - Viavi 6000A V2 User Manual

Internal memory open via Internet Explorer
Sending files by
mail
3 In the address bar, type the following address (10.33.17.113,
being the IP address of the 6000A V2 Platform defined when the
connection was configured;
ftp://mts6000:acterna@10.33.17.113/disk/
This allows to access to internal memory.
ftp://mts6000:acterna@10.33.17.113/usbflash/
This allows to access to the contents of the USB memory stick
connected to the 6000A V2 Platform.
If you use Internet Explorer 7, the following address must be entered:
ftp://mts6000:acterna@10.33.17.113/acterna/user/disk or
ftp://mts6000:acterna@10.33.17.113/acterna/user/usb-
flash
4 If an identification is required, enter:
– User name: mts6000
– Password: acterna
The PC then displays the contents of the internal memory or of the
USB memory stick from the 6000A V2 Platform.
Fig. 48 Internal memory of the 6000A V2 Platform
5 If internal memory of the Platform is accessible via Internet Explorer
(or any other explorer), right click on one file and click on Save
target as... to transfer file onto the PC.
If internal memory of the Platform is accessible via Windows
Explorer,
select one / several files and click on Copy, then click on
Paste on PC to transfer file
The 6000A V2 Platform can send files (traces or others) via e-mail, from
the Explorer.
User Manual 76100000200 Rev. 001
Working with directories and files from the explorer
Internal memory open via Windows Explorer
.
Chapter 10 File management
81