Fiber; Link Description - Viavi 6000A V2 User Manual

Fiber

Link Description

The Fiber box allows to configure the fiber plugged to the scope.
On the line Fiber Id, enter a name for the fiber using the edition menu
displayed via the right direction key.
On the line Fiber Number, use the numeric keypad, which will display by
clicking on the right arrow key, to enter the fiber number.
On the line Change fiber Nbr, select if the fiber number must be modified
after each results saving:
No: the fiber number is not modified at each saving
Increment; the fiber number is automatically incremented at
each results saving
Decrement: the fiber number is automatically decremented at
each results saving.
The information entered in the Link Description window concern the
editing and/or the modifications of the cable and fiber parameters.
– Cable Id: This parameter allows to enter an identification of the
cable, using the Edition menu.
– Direction: The direction shows if the acquisition has been made
from the origin to the extremity (A->B) or from the extremity to the
origin (B->A). Changing direction makes it possible, when different
extremities are handled, to see the parameters of the fiber for the
other extremity.
– Location A: The name of the Location A of the link may be entered
here.
– Location B: The name of the Location B of the link may be entered
here
– Company: Allows to enter the name of the company carrying out
the test.
– Operator: Use the right arrow key to enter the name of the operator
carrying out the test.
NOTE
All parameters of the Link Description box will appear in the pdf
report generated from a test results page. See
page 46.
Press Exit to return to the Results screen of the scope.
User Manual 76100000200 Rev. 001
Chapter 6 Scope
Configuring the P5000i Scope
"Generating a report"
39