Fitting The Cleaning Cutter - Fronius Robacta Reamer X-Line J Operating Instructions Manual

Fitting the Cleaning Cutter

Fitting the clean-
ing cutter
Burning hazard due to hot cleaning cutter as a result of operation.
Before handling the cleaning cutter, allow it to cool to room temperature (+25°C, +77°F).
NOTE!
Only use contact tips, gas nozzles and cleaning cutters provided by the manufactur-
er.
Correct operation is not ensured if products made by other manufacturers are used. The
manufacturer accepts no liability for damage caused if contact tips, gas nozzles or cleaning
cutters made by other manufacturers are used.
NOTE!
The cleaning cutter is not included in the scope of supply.
Find the right cleaning cutter in the manufacturer's Spare Parts List.
1
6
2
1
3
CAUTION!
Remove the protective cover from the cleaning device
2
Mount the protective cover on the cleaning device so that it is in its original position
once again
39