Installation And Commissioning; Device Concept; Original Equipement And Tools - Fronius Robacta Drive CMT-PAP G Operating Instructions Manual

Installation and commissioning

Device concept

The Robacta Drive CMT-PAP G robot welding torch consists of a torch neck, dri-
ve unit, CrashBox and hosepack.
In combination with the wire buffer on the hosepack, the integral wire drive mo-
tor can quickly reverse the welding wire. The external wirefeed means that all
wirefeed components can be replaced quickly. Many different torch neck designs
facilitate easy access to the weld.
Robacta Drive CMT-PAP G is especially suited to:
-
-
-
Original equipe-
In order to operate the Robacta Drive CMT-PAP G, original equipment that cor-
ment and tools responds to the wire diameter and to the filler metal is required (see spare parts
list):
-
-
-
a) Graphite combination liners with end piece
b) Graphite
c) Bronze
d) Steel
Al
a)
) b
34
General light-gauge sheet applications
Spatter-free MIG brazing of galvanized light-gauge sheets
Joining steel to aluminium.
Original equipment aluminium
Original equipment steel/CuSi
Original equipment CrNi
mm
0,9 1,0
inch
.035 .039
1x 1x 1x
"CB"
1x
1x
) b
Steel
1,2 1,6
CuSi
.047 .063
3x 1x
1x 3x
"CB"
c)
1x
) d
mm
0,8 0,9 1,0
inch
.032 .035 .039
1x 1x 1x 3x
1x
"CB"
1x
1x 1x
) d
1,2
.047
3x