ATTO Technology FastStream VT 5300 Installation And Operation Manual page 29

4 Click Next
5 Select the drive(s) you want to add or remove
from the Hot Spare pool.
6 When you have completed your changes, click
Commit.
7 In the warning box, verify that you want to add
or remove the Hot Spare by clicking on Yes.
Add a VTL from another FastStream VT
You may attach a VTL from another FastStream
VT to the FastStream VT you are currently
working with. The current FastStream VT must
discover the other VTL through mapping. When
you create your first library, the media changer
and tape drive LUNs are mapped automatically to
one of two ports. When you recognize a second
library, it may be mapped to the other port or to
the same port.
Note
The FastStream VT supports two libraries, one
on each port or both on one port.
1 If you are not already in the ExpressNAV
interface, type the IP address of your appliance,
as found in Use the ExpressNAV interface
page 27, in a standard browser, click Enter
Clicking on No ends the procedure without
making a change.
8 When the process is complete the Health and
Status Monitor page appears.
9 For System Configuration and Other
Devices, refer to
configurations
Notification, refer to
messages
Here and type in your user name and
password.
2 Click on the Advanced button.
3 In the text box provided type blockdevscan.
4 Click on Submit.
5 The FastStream discovers the VTL from the
other FastStream. In the text box provided type
AutoMap.
6 Click on Submit.
7 When Ready* is displayed in the screen below,
type SaveConfiguration.
8 Click on Submit.
9 Click on the VTL menu item on the left hand
side of the screen.
10 The Monitor VTL page appears. A tab for the
on
library you just added is displayed.
Customize system
on page 13. For Set Up Error
Phone home: E-mail
on page 18
24