Health and Status Monitor page
the Health and Status Monitor provides
information about the RAID group status,
FastStream VT environmental status, Ethernet
and Fibre Channel interface states, and drive
status, including links to diagnostics and more
detailed information.
1
If you are not already in the ExpressNAV
interface, type the IP address of your appliance,
Use the ExpressNAV interface
as found in
page 27, in a standard browser, click Enter
Here and type in your user name and
password.
2
The Monitor VTL page appears. On the menu
at the left hand side of the page, click on
Monitor.
3
The Health and Status Monitor page appears.
If you click Details, added information about
each parameter appears on the Configuration
Display page (refer to
page
below).
Exhibit 3.0-1 The Health and Status Monitor page.
on
Configuration Display
• RAID Groups: RAID Group names, RAID
status, available Hot Spares and the number
of Hot Spares which have been substituted
for faulted drives.
• Environmental Status: Temperature and
voltage of the FastStream VT
• Interface Status: Ethernet management port
link status and Fibre Channel port link, speed
and connection mode
• Drive status by port: Size and status
If you click on Drive Health, the Drive
Performance and Health page appears (refer
Measure drive performance and health
to
page 20) which may also be reached by clicking
on the left hand menu item Diagnostics.
If you click on System Scan, the FastStream
VT scans for attached drives and populates the
Port 1 Drives and Port 2 Drives sections of the
page.
on
16