Fault - Angelo Po 191TPE Use And Installation Manual

TROUBLESHOOTING
The appliance has been tested before being put
into service. The information provided below is in-
tended to assist in the identification and correction
of any anomalies and malfunctions which might oc-
cur during use. The user can solve some of these
Faults
The heating elements do not
come on.
The appliance does not heat up to
the set temperature
The control panel does not come
on
A

FAULT

Causes
Electrical connection not made
correctly.
Temperature sensor malfunction
Electrical connection not made
correctly
Electronic circuit board not recei-
ving electrical power
Electronic circuit board damaged
- 13 -
B
problems himself, but for others specific tech-
nical knowledge or skill is required, and so
they must only be carried out by qualified staff
with recognised experience acquired in the
specific sector of operation.
Check the connection of the
Contact the after-sales
service
Check the connection of the
Check the connection of the
Contact the after-sales
service
IDM-39617101000_2.tif
Remedies
electrical wires.
Important
electrical wires
electrical wires
Important
6
IT
GB
DE
FR
ES
English