Angelo Po 191TPE Use And Installation Manual page 30

The appliance is fitted with the controls for use of its
main functions.
A)Cooking start and stop key
(ON/OFF): for starting or stopping the cooking
cycle.
– Press key to set the circuit board in standby mo-
de.
Note: This is the mode in which the appliance
can be programmed.
– Press key again to start the cooking cycle.
– Keep the key pressed for about 6 seconds to stop
the cooking cycle and switch the circuit board to
OFF mode.
B)Temperature setting key: for reducing the tem-
perature.
C)Temperature setting key: for increasing the
temperature.
D
IT
IT
E
GB GB H
DE DE
FR FR
ES
ES
English
DESCRIPTION OF CONTROLS
A B C
D)Power setting key: for setting the heating
power.
E)Digital display: displays the working parameters
and alarm codes.
F) Degrees "Celsius" light:: indicates that tempe-
rature display in degrees "Celsius" is active.
G)Degrees "Fahrenheit" light:: indicates that tem-
perature display in degrees "Fahrenheit" is acti-
ve.
H)Temperature light: indicates that heating of the
plate is in progress, goes out when the set tem-
perature is reached.
L) Heating element light: indicates which elemen-
ts are in operation.
M)Mains light: comes on to indicate that the electri-
city supply is on.
F
G
M
L
- 8 -
IDM-39617100400.tif