Angelo Po 191TPE Use And Installation Manual page 39

ASSEMBLY APPLIANCES IN BANKS
To assemble appliances in banks (side by side)
proceed as described below.
1 - Undo the screws (C) and remove the control
panels (B).
2 - Apply masking tape to the edges to be placed
side by side.
3 - Apply food-approved sealant to the edges to be
placed side by side.
4 - Place the appliances side by side.
5 - Connect the appliance using the screws and
nuts (D-E).
6 - Remove the excess sealant and the masking
tape.
7 - Apply the sealant to the inside of the lid (F), and
fit it to cover the fixing zone.
8 - Replace the control panels (B) on completion of
the operation.
A variety of optional installation kits are available for
arranging appliances in banks:
G)"Bridge" installation kit
G
C
D
L) Supporting beam kit
M)"Over cupboard" installation kit
H
- 17 -
B
F
E
IDM-39617101400.tif
L
IDM-39614501300.tif
IT
GB
DE
FR
ES
English