Table of Contents
Advertisement
26
L E R
W A N D
IN
D C -A C
T E R
IN V E R
D C -A C
O U T
4. Setup of Equipment
4.1 Set up and connect unit
1. Set up the unit on a flat surface, e.g. on
a bedside cabinet or on the floor next to
the bed. Keep a space of min. 5 cm be-
tween the rear of the unit and the wall as
the air inlet is on the rear of the unit.
Important
Do not cover the unit.
2. Connect the power supply cable
supply connection
SOMNOvent ST automatically detects
whether 115 V or 230 V has been con-
nected and switches over automatically.
The display shows "0" for standby.
3. If SOMNOvent ST is to be operated with
a voltage of 12 or 24 V DC, connect the
inverter
to a cigarette lighter.
35
To do so either use an :
– inverter 12 V WM 24131
– inverter 24 V WM 24132
Connect the outlet of the inverter and the
supply connection
using the power supply cable
4. Please insert the adapter
system into the unit outlet
Note:
The appliance automatically compen-
sates for differences in air pressure (e.g.
due to high altitude).
English
to the
3
and a socket outlet.
32
of SOMNOvent ST
32
.
3
of the hose
10
.
7
Advertisement
Table of Contents
