Ez-Kit Lite License Restrictions; Memory Map - Analog Devices ADSP-21160 EZ-KIT LITE Manual

Hide thumbs Also See for ADSP-21160 EZ-KIT LITE:

Table of Contents

3.2 EZ-KIT Lite License Restrictions

The license shipped with the EZ-KIT Lite evaluation system imposes the

following restrictions:

• Memory is limited to 21 Kwords of ADSP-21160 program memory.

• No connections to Simulator or Emulator sessions are allowed.

• Only one EZ-KIT Lite evaluation system can be connected to the host PC

and debugged at a time

The ADSP-21160 has internal SRAM that can be used for instruction storage or

data storage. The configuration of internal SRAM is detailed in the ADSP-21160

SHARC DSP Hardware Reference.

The External Port (EP) of the ADSP-21160 is connected to flash and SBSRAM.

There is 512KB (512K x 8-bits) of external flash memory. This memory is

connected to the DSP's ~MS0 and ~BMS memory select pins.

The EP is also connected to 512 KB (64K x 32-bit x 2-chips) of SBSRAM. This

memory is connected to the ~MS1 memory select pin. This memory is flow-

through SBSRAM, capable of burst reads and writes. To set up burst moves,

refer to the ADSP-21160 SHARC DSP Hardware Reference.

The memory map in

SYSCON register. The memory maps shows MSIZE set to 1100b.

ADSP-21160 EZ-KIT Lite Evaluation System Manual

Table 3-1

is dependant on the value of the MSIZE bits in the

3-25

Table of Contents

Do you have a question about the ADSP-21160 EZ-KIT LITE and is the answer not in the manual?