Installing The Visualdsp++ License; Installing The Ez-Kit Lite Debug Software; Setting Up The Ez-Kit Lite Hardware - Analog Devices ADSP-21160 EZ-KIT LITE Manual

2.4.2 Installing the VisualDSP++ License

Before the VisualDSP++ software can be used, the license must be installed.
To install the VisualDSP++ license:
1. Ensure that VisualDSP++ has been installed.
2. Insert the VisualDSP++ disc into the CD-ROM drive if it is not already in
the drive.
3. At the home screen of the VisualDSP++ install wizard, select the Install
License option.
4. Follow the setup wizard instructions.
! NOTE: You will need the serial number located on the back of the disc
sleeve.

2.4.3 Installing the EZ-KIT Lite Debug Software

VisualDSP++ communicates with the EZ-KIT Lite board using the EZ-KIT Lite
debug software. This software is supplied on the EZ-KIT Lite CD-ROM.
To install the EZ-KIT Lite debug software:
1. Ensure that VisualDSP++ has been installed.
2. Close all Windows applications. The install will not work correctly if any
VisualDSP++ applications are running.
3. Insert the EZ-KIT Lite disc into the CD-ROM drive. If Auto Run is
enabled on your PC, the home screen of the EZ-KIT Lite install wizard
will automatically appear. If not, choose Run from the Start menu, and
enter D:\Setup.exe in the Open field, where D is the name of you local
CD-ROM drive. Click the Install EZ-KIT Lite Software option. This
will launch the setup wizard. Follow this wizard with the on-screen
instructions.

2.4.4 Setting Up the EZ-KIT Lite Hardware

The EZ-KIT Lite evaluation system contains ESD (electrostatic
discharge) sensitive devices.
accumulate on the human body and equipment and can
discharge without detection. Permanent damage may occur on
devices subjected to high-energy discharges.
precautions are recommended to avoid performance degradation
or loss of functionality. Store unused EZ-KIT Lite boards in the
protective shipping package.
The ADSP-21160 EZ-KIT Lite board is designed to run outside your personal
computer as a stand-alone unit. You do not have to open your computer case.
To connect the EZ-KIT Lite board:
ADSP-21160 EZ-KIT Lite Evaluation System Manual
Electrostatic charges readily
Proper ESD
2-8