Pc Configuration; Installation Tasks; Installing The Visualdsp++ Software; Table 2-1: Minimum Pc Configuration - Analog Devices ADSP-21160 EZ-KIT LITE Manual

2.3 PC Configuration

For correct operation of the VisualDSP++ software and the EZ-KIT Lite
hardware, your computer must have the minimum configuration shown in Table
2-1.

Table 2-1: Minimum PC Configuration

Windows 98, Windows 2000 or later
Intel (or comparable) 166 MHz processor
VGA Monitor and color video card
2-button mouse
50 MB free on hard drive
32 MB RAM
Full-speed USB port
CD-ROM Drive
! NOTE: This EZ-KIT Lite evaluation system does not run under
Windows 95 or Windows NT.
2.4

Installation Tasks

The following tasks are provided for the safe and effective use of the
ADSP-21160 EZ-KIT Lite evaluation system. Follow these instructions in the
order presented to ensure correct operation of your software and hardware.
1. VisualDSP++ software installation
2. VisualDSP++ license installation
3. EZ-KIT Lite debug software installation
4. EZ-KIT Lite hardware setup
5. EZ-KIT Lite USB driver installation
6. USB driver installation verification
7. VisualDSP++ startup

2.4.1 Installing the VisualDSP++ Software

This EZ-KIT Lite evaluation system comes with the latest version of
VisualDSP++ for the SHARC DSP family. You must install VisualDSP++ before
installing the EZ-KIT Lite debug software.
Insert the VisualDSP++ disc into the CD-ROM drive. If Auto Run is enabled on
your PC, the home screen of the VisualDSP++ install wizard will automatically
appear. If not, choose Run from the Start menu, and enter D:\Setup.exe in the
Open field, where D is the name of your local CD-ROM drive. Click on the
Install VisualDSP++ option. This will launch the setup wizard. Follow the on-
screen instructions.
ADSP-21160 EZ-KIT Lite Evaluation System Manual
2-7