Construction Features Of Tractor Belarus 3522.5 With Non Installed Fll And Fpto - Belarus 3522.5 Operator's Manual

3.27 Construction features of tractor BELARUS 3522.5 with non installed FLL
and FPTO
On tractor BELARUS 3522.5 the FLL and FPTO can not be mounted against order.
In this case in tractor cab instead of control panel of FLL 36 (figure 2.2.1) is placed a plug.
The control elements2, 3, 32, 33, 34 of FPTO (figure 2.13.4) situated on the CECS are not
used, remote buttons of FLL control are absent .
The ballast weights are mounted on front bar.
The fan 7 (figure 3.27.1) is driven from crank tailshaft through adaptor 3, through
doubled pivot 4 with splane shaft, through gear-shaft 5, throught fan 6 drive shaft.
During operation the maintainance of fan drive is not necessary.
The fan drive is filled at production plant with oil ТАп-15В or ТЭп-15 GOST 23652-
79 in the volume(6,9±0,1l).
If it's become necessary to change oil in fan drive, the following shall be done:
- dismount fan drive housing 1 from the tractor;
- unscrew plug from the filling opening 2 and drain plug 8, drain oil;
- screw the drain plug 8;
- place fan drive housing 1 with filling opening 2 locking up and fill reduction unit
with oil (6,9±0,1)l through filling opening 2;
- screw plug in filling opening 2;
- mount the fan drive housing 1 on the tractor;
- gear-shaft 5 should turn round without jammings.
1 – fan drive housing; 2 – filling opening; 3 – adaptor; 4 – doubled pivot; 5 – gear-
shaft of fan drive; 6 – fan drive shaft; 7 – fan, 8 – drain plug.
Figure 3.27.1 – Dan drives on the tractors BELARUS-3522.5 without FLL and
FPTO.
208
https://tractormanualz.com/
3522.5-0000010 РЭ