Activation Of Changeable Images And Parameters On The Screen Of The Information Display - Belarus 3522.5 Operator's Manual

2.8.3 Activation of changeable images and parameters on the screen of the
information display
1 – button to activate the main (three-segment) image and choose between induc-
ible parameters; 2 – button to activate four-section image and choose between inducible
parameters; 3 – button to activate graphic display and choose between inducible parame-
ters; 4 – button to activate indication of error (fault) list and choose between inducible pa-
rameters; 5 – button to enter/exit the mode of adjustment of sharpness, brightness and
PIN-code; 6 – changeable display of buttons functional purpose; 7 – screen.
The monitor buttons 1, 2, 3, 4, 5 (figure 2.8.1) are of multifunctional purpose. When
pushing any of the buttons 2, 3, 4 during the monitor operation, an image of the button
panel 6 appears on the screen, the icons denoting the current functions of each button.
After the button panel 6 has been activated, pressing the button 1 on the monitor ac-
tivates the main three-segment image on the screen. Hereby an engine speed scale is
displayed in the upper left corner, and a scale of oil pressure in the engine lubrication sys-
tem in the upper right corner, cooling fluid temperature in the lower right corner, current
fuel flow per hour in the lower left corner. When the three-segment imaging is displayed
the inducible parameters are chosen between with the button 1. To exit the mode of
choosing between the inducible parameters in the upper right corner it is required to press
button 5 after activation the button panel 6. After that the parameters are chosen between
with the buttons 1 and 2.
After the button panel 6 has been activated a four-segment imaging of parameters
on the screen 7 is activated with the button 2. After the first pressing the button 2 four pa-
rameters are displayed in a digital mode on the screen:
- in the upper left corner – engine speed;
- in the upper right corner – coolant temperature;
- in the lower left corner – on-board voltage;
- in the lower right corner – oil pressure in the lubrication system.
When pressing the button 2 for the second and the third time, four parameters are
displayed on the screen in an analog from.
Figure 2.8.1 – Information display
41
https://tractormanualz.com/
3522.5-0000010 РЭ