3.15 Hydrostatic Steering Control
3.15.1 General information
The hydrostatic steering control (HSC) is intended for control of guide wheels turn,
for steering effort decrease at tractor turning. HSC consists of two dosing pumps 2 and 3
(figure 3.15.1), of reverse valve switch 4, of two differential hydraulic cylinders 1, making
turning, of feed pump 5 with motor drive and of hydraulic fittings.
Hydraulic circuit diagram of HSC is shown in figure 3.15.1.
Integrated oil tank of HLL and HSC
1 – hydraulic cylinder; 2 – dosing pump of forward motion;; 3 – dosing pump of re-
verse motion; 4 – reverse valve switch; 5 – feed pump; 6 – valve; Р – feeding; Т – drain; L
–left-hand turn; R – right-hand turn.
Drain from
HLL
Protective valve
Figure 3.15.1 – HSC hydraulic circuit diagram
https://tractormanualz.com/
164
3522.5-0000010 РЭ
Oil cooling
radiator