Side Windows - Belarus 3522.5 Operator's Manual

1 - bolt; 2 – hinge; 3 – center support of cab frame; 4 – plane.
If necessary, the equal adjointing of the door to the door aperture can be achieved
by installation of additional plates 4 (figure 3.25.5) between center support 3 of the cab
and hinges 2.

3.25.4 Side windows

The side windows are opening, frameless windows, the windows are hinged to cab frame.
The window in open and closed condition is fixed by handle 1 (figure 3.25.6).
If necessary the equal adjointing of side window to the window apperture is ensured
by installation of additional washers 3 between window and bracket 4 of window clamper.
1 – handle; 2 – center support of cab frame; 3 – washers; 4 – bracket.
For side window position adjustment the following shall be done:
- take off cap 5 (figure 3.25.7);
- loosen the nut 6;
- turning eccentric bushing 4 find necessary window position (between side glass
contour and window apperture contour should be minimum positive allowance of
2mm), tighten nut 6, put cap 5.
- for equal adjointing of side window to window apperture change quantity of wash-
ers 1, installed between glass 2 and hinge 3.
1 – washer; 2 – glass; 3 – hinge; 4 – eccentric bushing; 5 – cap; 6 – nut, 7 – rear
support of cab frame; 8 – fixation pin.
Figure 3.25.5 – Door fastening to cab frame
Figure 3.25.6 – Fixation of side window
Figure 3.25.7 – Side window adjustment
203
https://tractormanualz.com/
3522.5-0000010 РЭ