Chapter 11 Other Functions; Device Control - HikRobot CA Series User Manual

11.1 Device Control

In the Device Control interface, you can view device information, edit device name, reset device,
etc. The specific parameters in Device Control interface are shown below.
Parameter
Device Type
Device Scan Type
Device Vendor Name
Device Model Name
Device Manufacture Info
Device Version
Device Firmware Version
Device Serial Number
Device ID
Device User ID
Device Uptime(s)
Board Device Type
Device Connection
Selector
CA/CE-Series GigE Area Scan Camera·User Manual

Chapter 11 Other Functions

Table 11-1 Device Control Parameter Description
Read/Write
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read only
Read and write Device name and it is empty by default. You can set
Read only
Read only
Read and write It is the ID of GenICam XML.
Description
It is the device type.
It is the scan type of the sensor.
It is the name of device manufacturer.
It is the device model.
It is the manufacturer information.
It is the device version.
It is the device firmware version.
It is the device serial number.
It is the device ID.
according to your preference.
 If User ID is empty, the client software displays
the device model.
 If you set it, the client software displays the
User ID you set.
It is the period of time when device is powered up.
It is the device type.
69