Connect Camera To Mvs - HikRobot CA Series User Manual

6. Edit the information, and click OK.
 You can modify the IP address of the device if its status is free.
 When switching between static IP and DHCP, the device will restart automatically.
 Change the IP address if the modified IP address conflicts with another device's IP address in
the same local subnet.
 The parameters in the figure are only for reference. Please enter the parameters according to
the actual situation.

3.4 Connect Camera to MVS

Before you start:
 Power on the camera.
 Make sure your camera and the PC are in the same network segment.
Steps:
1. Run the MVS client software.
2. Click to connect the camera.
CA/CE-Series GigE Area Scan Camera·User Manual
Figure 3-4 Modify IP Address
8