Set Hue And Saturation - HikRobot CA Series User Manual

CA/CE-Series GigE Area Scan Camera·User Manual
Steps:
1. Click Analog Control > Gamma Selector.
2. Select User as Gamma Selector.
3. Enable Gamma Enable.
4. Enter proper value in Gamma according to actual demands, and its range is from 0 to 4.
Figure 10-22 Set User Mode
You can set sRGB mode as shown below.
Steps:
1. Click Analog Control > Gamma Selector.
2. Select sRGB as Gamma Selector.
3. Enable Gamma Enable.
Figure 10-23 Set sRGB Mode
The Gamma correction function is disabled by default.

10.14 Set Hue and Saturation

Only the color camera supports hue and saturation function.
 Hue
Adjusting the hue shifts the colors of the image.
63