HikRobot CA Series User Manual page 43

Parameter
Device Key
Group Key
Group Mask
4. Enable Scheduled.
5. Click in Benchmark Camera to select one camera from drop-list as benchmark camera.
Once benchmark camera is selected, other cameras keep time synchronization with it.
6. (Optional) Enter proper value in Delay Time.
 The delay time should NOT be shorter than the maximum time required to transmit the
command across the network.
 When the benchmark camera receives the command, all the cameras will trigger certain
actions simultaneously after the specified delay time.
CA/CE-Series GigE Area Scan Camera·User Manual
Figure 7-23 Set Action Command
Table 7-6 Parameter Description
Requirement
Its value should be the same with the value of the
ActionDeviceKey feature.
Its value should be the same with the ActionGroupKey
feature.
The bitwise AND operation of the Group Mask against
the ActionGroupMask feature should results in non-zero.
33