Set Sharpness; Set Aoi - HikRobot CA Series User Manual

10.15 Set Sharpness

The camera supports sharpness function that can adjust the sharpness level of the image edge,
and this function is disabled by default. You can set sharpness as shown below.
Steps:
1. Click Analog Control > Sharpness Enable.
2. Enable Sharpness Enable.
3. Enter proper value in Sharpness according to actual demands, and its range is from 0 to 100.

10.16 Set AOI

You can also set AOI and the camera will adjust the brightness and white balance of the entire
image based on the area you selected.
Steps:
1. Click Analog Control > Auto Function AOI Selector.
2. Select AOI 1 or AOI 2. AOI 1 adjusts image brightness, and AOI 2 adjusts white balance for color
camera.
3. Enter proper value in Auto Function AOI Width, Auto Function AOI Height, Auto Function AOI
Offset X, and Auto Function AOI Offset Y according to actual demands.
4. If you select AOI 1 as Auto Function AOI Selector, and enable Auto Function AOI Usage Intensity.
If you select AOI 2 as Auto Function AOI Selector, and enable Auto Function AOI Usage White
Balance.
CA/CE-Series GigE Area Scan Camera·User Manual
Figure 10-26 Set Sharpness
Figure 10-27 Set AOI
65